Code multizone for mitsui 1554

[ Other Replys ] [ Reply to this message ] [ Return to Discussion Forum ] Posted by dontello Chihuas on February 06, 19104 at 14:35:17:

In Reply to: Re: im search code multizone for mitsui 1554 posted by nemo on January 24, 19104 at 19:53:58:

Perfecto Si funciona!!! IT Works

USE THIS CODES FOR MITSUI 1554 DVD PLAYER, WORKS VERY WELL.

: you can hack this player with the following handset code:

: 1. Power the player up.
: 2. Press "Setup".
: 3. Type "13698888" on the remote. A new menu item, "version", appears.
: 4. Press "Cursor down" until "version" is highlighted.
: 5. Press "Play" (remote).
: 6. Press "Cursor up" or "Cursor down" to set the region code to "1", "2", or "0" (multiregion).
: 7. Press "Setup".

: And there you go. This hack can be applied without limitations. MACROVISION cannot be disabled, though (Mediatech chip = hardware MV)

Other Replys

Reply to this message

Name:

E-Mail:
(optional)

Subject:

Message:
: Perfecto Si funciona!!! IT Works : USE THIS CODES FOR MITSUI 1554 DVD PLAYER, WORKS VERY WELL. : : you can hack this player with the following handset code: : : 1. Power the player up. : : 2. Press "Setup". : : 3. Type "13698888" on the remote. A new menu item, "version", appears. : : 4. Press "Cursor down" until "version" is highlighted. : : 5. Press "Play" (remote). : : 6. Press "Cursor up" or "Cursor down" to set the region code to "1", "2", or "0" (multiregion). : : 7. Press "Setup". : : And there you go. This hack can be applied without limitations. MACROVISION cannot be disabled, though (Mediatech chip = hardware MV)

Reply to this message
Name:
E-Mail:	(optional)
Subject:
Message:	: Perfecto Si funciona!!! IT Works : USE THIS CODES FOR MITSUI 1554 DVD PLAYER, WORKS VERY WELL. : : you can hack this player with the following handset code: : : 1. Power the player up. : : 2. Press "Setup". : : 3. Type "13698888" on the remote. A new menu item, "version", appears. : : 4. Press "Cursor down" until "version" is highlighted. : : 5. Press "Play" (remote). : : 6. Press "Cursor up" or "Cursor down" to set the region code to "1", "2", or "0" (multiregion). : : 7. Press "Setup". : : And there you go. This hack can be applied without limitations. MACROVISION cannot be disabled, though (Mediatech chip = hardware MV)