Re: Akura ADV14S

[ Other Replys ] [ Reply to this message ] [ Return to Discussion Forum ] Posted by jim hancock on November 27, 19103 at 03:53:35:

In Reply to: Re: Akura ADV14S posted by jimc on November 23, 19103 at 14:05:59:

: This hack worked fine except I have a B&W picture with NTSC/Region 1 DVDs. Any ideas? It's a Sharp TV. / Jim

: : 1. In the no disc mode (i.e when the player is powered on without a disc)
: : 2. press the setup key on the remote
: : 3. then press the following key in order
: : 4. vol + , vol - , vol + , vol – (these are the buttons marked + & - that are under the audio key on the remote)
: : 5. when you have press these button your display should read region 2 in the top left on the screen.
: : 6. then use the right key (the blue right button in the middle of the remote) until the 2 in the top left of the screen reads 255 (the numbers 1 to 6 are the different regions and 255 is multi region)
: : 7. when 255 is highlighted then press the return key on your remote and then press the menu button which should take you to the the no disc mode
: : 8. now you player is region free (and remember this is a one of hack and will never need to be repeated)

Other Replys

Re: Akura ADV14S Melanie 12/11/103 (0)

Reply to this message

Name:

E-Mail:
(optional)

Subject:

Message:
: : This hack worked fine except I have a B&W picture with NTSC/Region 1 DVDs. Any ideas? It's a Sharp TV. / Jim : : : 1. In the no disc mode (i.e when the player is powered on without a disc) : : : 2. press the setup key on the remote : : : 3. then press the following key in order : : : 4. vol + , vol - , vol + , vol – (these are the buttons marked + & - that are under the audio key on the remote) : : : 5. when you have press these button your display should read region 2 in the top left on the screen. : : : 6. then use the right key (the blue right button in the middle of the remote) until the 2 in the top left of the screen reads 255 (the numbers 1 to 6 are the different regions and 255 is multi region) : : : 7. when 255 is highlighted then press the return key on your remote and then press the menu button which should take you to the the no disc mode : : : 8. now you player is region free (and remember this is a one of hack and will never need to be repeated)

Reply to this message
Name:
E-Mail:	(optional)
Subject:
Message:	: : This hack worked fine except I have a B&W picture with NTSC/Region 1 DVDs. Any ideas? It's a Sharp TV. / Jim : : : 1. In the no disc mode (i.e when the player is powered on without a disc) : : : 2. press the setup key on the remote : : : 3. then press the following key in order : : : 4. vol + , vol - , vol + , vol – (these are the buttons marked + & - that are under the audio key on the remote) : : : 5. when you have press these button your display should read region 2 in the top left on the screen. : : : 6. then use the right key (the blue right button in the middle of the remote) until the 2 in the top left of the screen reads 255 (the numbers 1 to 6 are the different regions and 255 is multi region) : : : 7. when 255 is highlighted then press the return key on your remote and then press the menu button which should take you to the the no disc mode : : : 8. now you player is region free (and remember this is a one of hack and will never need to be repeated)