Re: Philps DVD 580M


[ Other Replys ] [ Reply to this message ] [ Return to Discussion Forum ]
Posted by Cryog on February 02, 19103 at 11:36:44:

In Reply to: Philps DVD 580M posted by Marg on January 29, 19103 at 03:33:29:

I find this instruction on the net:

easy if you have a 4 in 1 remote or similar. How to change the region setting to a Region 1 compatible machine:
This hack should work on all Philips DVD players as of 06/01/2001 with any firmware version, and other similar models by manufacturers such as Grundig, Marantz and Yamaha. Send the infra-red code RC6 (aka Codeset 4, Key 235) to your player. You can do this with a OneForAll remote such as the OneForAll 6 (or URC7560) or OneForAll 4 Digital with the following instructions: Configure the Remote using the setup code 0539 Press the Magic button Enter the code 085 If you own a Palm Pilot, you may also use Pacific Neo-Tek's OmniRemote software to generate the RC6 code using a downloadable .pdb file. Download the .pdb file into your Palm Pilot Press the OmniRemote key marked as 955 Multizone The onscreen display should show 11 spaces like this: '-----------' Using the number keys on your DVD player's Remote Control, enter the code 222 222 005 255. Note that this is 12 digits and the last digit will not show on the on-screen display Press the Play button on the DVD player's Remote The onscreen display should now show the words No Disc Power off your DVD player, wait 10 seconds and then power back on You may also use the following methods for players with firmware 6.2: Turn your DVD player on
The display will show you no disc Press Play and then press 1, 5, 9 on the DVD Remote On DVD display will appear ------ ----- Key in 101 040 000 140 on the Remote when you press the last digit you will see a little point Press Play The player will be turned off Your DVD is ready. it sounds complex but is actually easy and works for all philips marantz etc machines, worked for me np at all



Other Replys



Name:

E-Mail:

(optional)

Subject:

Message: