Re: Sony DVP NS300 - unlock codes please

[ Other Replys ] [ Reply to this message ] [ Return to Discussion Forum ] Posted by ROBERTO GUERRA - MARACAIBO VENEZUELA on August 27, 19103 at 15:53:19:

In Reply to: Sony DVP NS300 - unlock codes please posted by Bry on July 20, 19103 at 13:58:34:

DVP-NS300, DVP-NS305, DVP-NS400D, DVP-NS700, DVP-S330, DVP-S335, DVP-S360, DVP-S336, DVP-S525D, DVP-S530D, DVP-S535D, DVP-S536D, DVP-S725D, DVP-S735D
Multi-Region:
Turn On the unit with the remote controller
Wait until "no disc" appears in the unit's display
Press Pause, 3, 1, 4, 1, 5, 9
The word "CODE" should appear in the display
Within five seconds, press the key that corresponds to the zone you want i.e. 0 for region free, 1 for region 1, 2 for region 2 and so on
Again, within 5 seconds, press Pause and Power
If the above fails to work then you may wish to try the following:
Put the player into Standby mode
Press 1 and Return on remote for region 1, 2 and Return for region 2, and so on. Use 0 and Return to return player to default region settings
Press P-Mode and Return to play DVD's with the selected region, auto-switching is Off
Press Audio and Return for auto-switching On
Press Angle and Return for MacroVision On
Press Subtitle and Return for MacroVision Off

Other Replys

Reply to this message

Name:

E-Mail:
(optional)

Subject:

Message:
: DVP-NS300, DVP-NS305, DVP-NS400D, DVP-NS700, DVP-S330, DVP-S335, DVP-S360, DVP-S336, DVP-S525D, DVP-S530D, DVP-S535D, DVP-S536D, DVP-S725D, DVP-S735D : Multi-Region: : Turn On the unit with the remote controller : Wait until "no disc" appears in the unit's display : Press Pause, 3, 1, 4, 1, 5, 9 : The word "CODE" should appear in the display : Within five seconds, press the key that corresponds to the zone you want i.e. 0 for region free, 1 for region 1, 2 for region 2 and so on : Again, within 5 seconds, press Pause and Power : If the above fails to work then you may wish to try the following: : Put the player into Standby mode : Press 1 and Return on remote for region 1, 2 and Return for region 2, and so on. Use 0 and Return to return player to default region settings : Press P-Mode and Return to play DVD's with the selected region, auto-switching is Off : Press Audio and Return for auto-switching On : Press Angle and Return for MacroVision On : Press Subtitle and Return for MacroVision Off

Reply to this message
Name:
E-Mail:	(optional)
Subject:
Message:	: DVP-NS300, DVP-NS305, DVP-NS400D, DVP-NS700, DVP-S330, DVP-S335, DVP-S360, DVP-S336, DVP-S525D, DVP-S530D, DVP-S535D, DVP-S536D, DVP-S725D, DVP-S735D : Multi-Region: : Turn On the unit with the remote controller : Wait until "no disc" appears in the unit's display : Press Pause, 3, 1, 4, 1, 5, 9 : The word "CODE" should appear in the display : Within five seconds, press the key that corresponds to the zone you want i.e. 0 for region free, 1 for region 1, 2 for region 2 and so on : Again, within 5 seconds, press Pause and Power : If the above fails to work then you may wish to try the following: : Put the player into Standby mode : Press 1 and Return on remote for region 1, 2 and Return for region 2, and so on. Use 0 and Return to return player to default region settings : Press P-Mode and Return to play DVD's with the selected region, auto-switching is Off : Press Audio and Return for auto-switching On : Press Angle and Return for MacroVision On : Press Subtitle and Return for MacroVision Off