Re: Hack code for Samsung S224 DVD

[ Other Replys ] [ Reply to this message ] [ Return to Discussion Forum ] Posted by rojo on January 26, 19103 at 18:45:04:

In Reply to: Hack code for Samsung S224 DVD posted by Josie on December 25, 19102 at 18:17:09:

1. Turn on the player. Make sure the tray is closed and no disc is inserted. The Samsung logo should be visible on the TV screen.

2) Hold down the PLAY and STOP buttons on the front panel of the player. Within a few seconds, a language select screen should appear. Press 1 (on the remote) for English.

3) The Samsung logo should reappear, with the message "No Disc" on the screen and/or in the front panel display. Now, press the following buttons, on the remote, in sequence:

REPEAT, 5, 7, 5, 3, 8

Press them slowly and deliberately, but not too slowly (if you're unsure, about one button press per second is adequate). Don't take any notice of what appears on the TV screen while you're doing this. (Also, make sure you press the actual REPEAT button and *not* A-B REPEAT.)

4) *After* you've finished the button sequence, the number "02" should be visible in one corner of the TV screen. This indicates your currently set region.

5) Press 9 on your remote - the number will change to "09" - then *immediately* press OPEN/CLOSE on the remote to open the tray. (You *must* press OPEN/CLOSE before "09" disappears from the screen.)

6) Wait at least 15 seconds then press POWER on the remote - the tray will close and the player will go into standby mode. Wait at least another 15 seconds then press POWER again to turn the player back on.

Other Replys

Re: Hack code for Samsung S224 DVD greatful 2/06/103 (1)
- Re: Hack code for Samsung S224 DVD gord 5/02/103 (0)
Re: Hack code for Samsung S224 DVD greatful 2/06/103 (0)

Reply to this message

Name:

E-Mail:
(optional)

Subject:

Message:
: 1. Turn on the player. Make sure the tray is closed and no disc is inserted. The Samsung logo should be visible on the TV screen. : 2) Hold down the PLAY and STOP buttons on the front panel of the player. Within a few seconds, a language select screen should appear. Press 1 (on the remote) for English. : 3) The Samsung logo should reappear, with the message "No Disc" on the screen and/or in the front panel display. Now, press the following buttons, on the remote, in sequence: : REPEAT, 5, 7, 5, 3, 8 : Press them slowly and deliberately, but not too slowly (if you're unsure, about one button press per second is adequate). Don't take any notice of what appears on the TV screen while you're doing this. (Also, make sure you press the actual REPEAT button and *not* A-B REPEAT.) : 4) *After* you've finished the button sequence, the number "02" should be visible in one corner of the TV screen. This indicates your currently set region. : 5) Press 9 on your remote - the number will change to "09" - then *immediately* press OPEN/CLOSE on the remote to open the tray. (You *must* press OPEN/CLOSE before "09" disappears from the screen.) : 6) Wait at least 15 seconds then press POWER on the remote - the tray will close and the player will go into standby mode. Wait at least another 15 seconds then press POWER again to turn the player back on.

Reply to this message
Name:
E-Mail:	(optional)
Subject:
Message:	: 1. Turn on the player. Make sure the tray is closed and no disc is inserted. The Samsung logo should be visible on the TV screen. : 2) Hold down the PLAY and STOP buttons on the front panel of the player. Within a few seconds, a language select screen should appear. Press 1 (on the remote) for English. : 3) The Samsung logo should reappear, with the message "No Disc" on the screen and/or in the front panel display. Now, press the following buttons, on the remote, in sequence: : REPEAT, 5, 7, 5, 3, 8 : Press them slowly and deliberately, but not too slowly (if you're unsure, about one button press per second is adequate). Don't take any notice of what appears on the TV screen while you're doing this. (Also, make sure you press the actual REPEAT button and not A-B REPEAT.) : 4) After you've finished the button sequence, the number "02" should be visible in one corner of the TV screen. This indicates your currently set region. : 5) Press 9 on your remote - the number will change to "09" - then immediately press OPEN/CLOSE on the remote to open the tray. (You must press OPEN/CLOSE before "09" disappears from the screen.) : 6) Wait at least 15 seconds then press POWER on the remote - the tray will close and the player will go into standby mode. Wait at least another 15 seconds then press POWER again to turn the player back on.