Re: HOW DO I MAKE MY SOND DVP-S360 MULTI-REGIONAL????

[ Other Replys ] [ Reply to this message ] [ Return to Discussion Forum ]

Posted by Bryan Anderson on August 05, 19102 at 11:25:51:

In Reply to: Re: HOW DO I MAKE MY SOND DVP-S360 MULTI-REGIONAL???? posted by fire4752 on March 28, 19102 at 16:00:56:

: : HOW DO I MAKE MY SOND DVP-NS300 MULTI-REGIONAL????
: The Ultimate DVD Upgrade S735M
: User Manual
: Introduction
:

: The DVD Upgrade is an advanced modification to your DVD player, which adds extra features and enables you to get more from your machine. The upgrade supplements the DVD player and in no way harms the playback quality or removes any performance features of the machine.

: Players Supported
:

: The following DVD players are supported by this version of the DVD Upgrade:

:
: Sony DVP-S335
: Sony DVP-S336
: Sony DVP-S345
: Sony DVP-S360
: Sony DVP-S435
: Sony DVP-S535D
: Sony DVP-S536D
: Sony DVP-S560D
: Sony DVP-S570D
: Sony DVP-S735D
: Macrovision & CGMS disable
:

: All DVD players have a system called Macrovision built in to the player, which is designed to stop the copying of DVD discs to video. However, this system can have adverse affects on some projectors. For this reason the DVD MOD Upgrade disables Macrovision to solve any problems.

: Region, features selection
:

: Put your player into „Standby“ Mode and enter one of the following commands if necessary:

:
: Remote control command
: Function
:
: [0] [ENTER]
: Default
: Default region code on the player
:
: [1] [ENTER]
: Region 1
:
: [2] [ENTER]
: Region 2
:
: [3] [ENTER]
: Region 3
:
: [4] [ENTER]
: Region 4
:
: [5] [ENTER]
: Region 5
:
: [6] [ENTER]
: Region 6
:
: [7] [ENTER]
: Region 7
:
: [8] [ENTER]
: Region 8
:
: [PREV] [ENTER]
: Auto switching OFF (only play DVD´s with the selected region)
:
: [AUDIO] [ENTER]
: Default
: Auto switching ON
:
: [NEXT] [ENTER]
: Enable video interference impulses (Macrovision ON)
:
: [ANGLE] [ENTER]
: Default
: Disable video interference impulses (Macrovision OFF)
:
: [TV/DVD] [ENTER]
: Enable user operation prohibitions* and access restrictions
:
: [SUBTITLE] [ENTER]
: Default
: Disable user operation prohibitions* and access restrictions
:

: The selected region code is visible in the Service Menu. Put your player into the standby mode and enter, in series, [TITLE] [CLEAR] [POWER ON] and [5]. Do not enter the other pages of the service menu.

: * The DVD can no longer prohibit you from using the fast-forward, chapter change or Audio-/Subtitle-/Angle switch. You can no longer be forced to watch intros. Just press [TITLE] or [DVD MENU] and select PLAY.

:
: After inserting the disk, the player will display on the front panel all region codes allowed by the disk and the region code selected by the modification. A region 2 disc would show -2- - - - - - 2.

Other Replys

Re: HOW DO I MAKE MY SOND DVP-S360 MULTI-REGIONAL???? Brian 8/08/102 (0)

Reply to this message

Name:

E-Mail:
(optional)

Subject:

Message:
: : : HOW DO I MAKE MY SOND DVP-NS300 MULTI-REGIONAL???? : : The Ultimate DVD Upgrade S735M : : User Manual : : Introduction : : : : The DVD Upgrade is an advanced modification to your DVD player, which adds extra features and enables you to get more from your machine. The upgrade supplements the DVD player and in no way harms the playback quality or removes any performance features of the machine. : : Players Supported : : : : The following DVD players are supported by this version of the DVD Upgrade: : : : : Sony DVP-S335 : : Sony DVP-S336 : : Sony DVP-S345 : : Sony DVP-S360 : : Sony DVP-S435 : : Sony DVP-S535D : : Sony DVP-S536D : : Sony DVP-S560D : : Sony DVP-S570D : : Sony DVP-S735D : : Macrovision & CGMS disable : : : : All DVD players have a system called Macrovision built in to the player, which is designed to stop the copying of DVD discs to video. However, this system can have adverse affects on some projectors. For this reason the DVD MOD Upgrade disables Macrovision to solve any problems. : : Region, features selection : : : : Put your player into „Standby“ Mode and enter one of the following commands if necessary: : : : : Remote control command : : Function : : : : [0] [ENTER] : : Default : : Default region code on the player : : : : [1] [ENTER] : : Region 1 : : : : [2] [ENTER] : : Region 2 : : : : [3] [ENTER] : : Region 3 : : : : [4] [ENTER] : : Region 4 : : : : [5] [ENTER] : : Region 5 : : : : [6] [ENTER] : : Region 6 : : : : [7] [ENTER] : : Region 7 : : : : [8] [ENTER] : : Region 8 : : : : [PREV] [ENTER] : : Auto switching OFF (only play DVD´s with the selected region) : : : : [AUDIO] [ENTER] : : Default : : Auto switching ON : : : : [NEXT] [ENTER] : : Enable video interference impulses (Macrovision ON) : : : : [ANGLE] [ENTER] : : Default : : Disable video interference impulses (Macrovision OFF) : : : : [TV/DVD] [ENTER] : : Enable user operation prohibitions* and access restrictions : : : : [SUBTITLE] [ENTER] : : Default : : Disable user operation prohibitions* and access restrictions : : : : : : The selected region code is visible in the Service Menu. Put your player into the standby mode and enter, in series, [TITLE] [CLEAR] [POWER ON] and [5]. Do not enter the other pages of the service menu. : : * The DVD can no longer prohibit you from using the fast-forward, chapter change or Audio-/Subtitle-/Angle switch. You can no longer be forced to watch intros. Just press [TITLE] or [DVD MENU] and select PLAY. : : : : After inserting the disk, the player will display on the front panel all region codes allowed by the disk and the region code selected by the modification. A region 2 disc would show -2- - - - - - 2.

Reply to this message
Name:
E-Mail:	(optional)
Subject:
Message:	: : : HOW DO I MAKE MY SOND DVP-NS300 MULTI-REGIONAL???? : : The Ultimate DVD Upgrade S735M : : User Manual : : Introduction : : : : The DVD Upgrade is an advanced modification to your DVD player, which adds extra features and enables you to get more from your machine. The upgrade supplements the DVD player and in no way harms the playback quality or removes any performance features of the machine. : : Players Supported : : : : The following DVD players are supported by this version of the DVD Upgrade: : : : : Sony DVP-S335 : : Sony DVP-S336 : : Sony DVP-S345 : : Sony DVP-S360 : : Sony DVP-S435 : : Sony DVP-S535D : : Sony DVP-S536D : : Sony DVP-S560D : : Sony DVP-S570D : : Sony DVP-S735D : : Macrovision & CGMS disable : : : : All DVD players have a system called Macrovision built in to the player, which is designed to stop the copying of DVD discs to video. However, this system can have adverse affects on some projectors. For this reason the DVD MOD Upgrade disables Macrovision to solve any problems. : : Region, features selection : : : : Put your player into „Standby“ Mode and enter one of the following commands if necessary: : : : : Remote control command : : Function : : : : [0] [ENTER] : : Default : : Default region code on the player : : : : [1] [ENTER] : : Region 1 : : : : [2] [ENTER] : : Region 2 : : : : [3] [ENTER] : : Region 3 : : : : [4] [ENTER] : : Region 4 : : : : [5] [ENTER] : : Region 5 : : : : [6] [ENTER] : : Region 6 : : : : [7] [ENTER] : : Region 7 : : : : [8] [ENTER] : : Region 8 : : : : [PREV] [ENTER] : : Auto switching OFF (only play DVD´s with the selected region) : : : : [AUDIO] [ENTER] : : Default : : Auto switching ON : : : : [NEXT] [ENTER] : : Enable video interference impulses (Macrovision ON) : : : : [ANGLE] [ENTER] : : Default : : Disable video interference impulses (Macrovision OFF) : : : : [TV/DVD] [ENTER] : : Enable user operation prohibitions* and access restrictions : : : : [SUBTITLE] [ENTER] : : Default : : Disable user operation prohibitions* and access restrictions : : : : : : The selected region code is visible in the Service Menu. Put your player into the standby mode and enter, in series, [TITLE] [CLEAR] [POWER ON] and [5]. Do not enter the other pages of the service menu. : : * The DVD can no longer prohibit you from using the fast-forward, chapter change or Audio-/Subtitle-/Angle switch. You can no longer be forced to watch intros. Just press [TITLE] or [DVD MENU] and select PLAY. : : : : After inserting the disk, the player will display on the front panel all region codes allowed by the disk and the region code selected by the modification. A region 2 disc would show -2- - - - - - 2.