Re: jvc xv-s300 region hack

[ Other Replys ] [ Reply to this message ] [ Return to Discussion Forum ]

Posted by Mac on June 25, 19102 at 13:05:06:

In Reply to: Re: jvc xv-s300 region hack posted by Reg on June 16, 19102 at 19:06:02:

Try something like this. It works with JVC Firmware on later models

1. Make sure there is no Disc in the tray.
2. Shut off the unit and unplug it from the AC outlet.
3. Press and Hold the "Play" and "Open/Close" keys, simultaneously on the player and not the remote control.
4. While holding these keys, plug the AC cord back into the outlet. (TEST and CPU ver# will appear on the display)
5. Release the "Play" and "Open/Close" keys.
6. Press DVD Menu twice on the remote.
7. When the display reads s000 5858 use the up and down buttons to change the 000 to 02E.
8. Using the Left and Right arrow buttons, change the last four digits until they read 0000 for Region Free, 0101 for Region 1, 0202 for Region 2 or 0404 for Region 4.
9. Press Enter on the player.
10. Press Standby and wait 5 seconds.
11. Press Standby again. Your player is now set to the region you requested. If you find some titles do not play on the region 0 setting, you may have to hard select the appropriate region.

Good Luck. LEt me know if it works

Other Replys

Re: jvc xv-s300 region hack Roel 8/05/102 (0)
Re: jvc xv-s300 region hack kevin 6/27/102 (0)
Re: jvc xv-s300 region hack kevin 6/26/102 (3)
- Re: jvc xv-s300 region hack Simon 7/07/102 (2)
  - Re: jvc xv-s300 region hack Gavin Kagan 8/07/102 (1)
    - Re: jvc xv-s300 region hack DodgyScouser 8/07/102 (0)

Reply to this message

Name:

E-Mail:
(optional)

Subject:

Message:
: Try something like this. It works with JVC Firmware on later models : 1. Make sure there is no Disc in the tray. : 2. Shut off the unit and unplug it from the AC outlet. : 3. Press and Hold the "Play" and "Open/Close" keys, simultaneously on the player and not the remote control. : 4. While holding these keys, plug the AC cord back into the outlet. (TEST and CPU ver# will appear on the display) : 5. Release the "Play" and "Open/Close" keys. : 6. Press DVD Menu twice on the remote. : 7. When the display reads s000 5858 use the up and down buttons to change the 000 to 02E. : 8. Using the Left and Right arrow buttons, change the last four digits until they read 0000 for Region Free, 0101 for Region 1, 0202 for Region 2 or 0404 for Region 4. : 9. Press Enter on the player. : 10. Press Standby and wait 5 seconds. : 11. Press Standby again. Your player is now set to the region you requested. If you find some titles do not play on the region 0 setting, you may have to hard select the appropriate region. : Good Luck. LEt me know if it works

Reply to this message
Name:
E-Mail:	(optional)
Subject:
Message:	: Try something like this. It works with JVC Firmware on later models : 1. Make sure there is no Disc in the tray. : 2. Shut off the unit and unplug it from the AC outlet. : 3. Press and Hold the "Play" and "Open/Close" keys, simultaneously on the player and not the remote control. : 4. While holding these keys, plug the AC cord back into the outlet. (TEST and CPU ver# will appear on the display) : 5. Release the "Play" and "Open/Close" keys. : 6. Press DVD Menu twice on the remote. : 7. When the display reads s000 5858 use the up and down buttons to change the 000 to 02E. : 8. Using the Left and Right arrow buttons, change the last four digits until they read 0000 for Region Free, 0101 for Region 1, 0202 for Region 2 or 0404 for Region 4. : 9. Press Enter on the player. : 10. Press Standby and wait 5 seconds. : 11. Press Standby again. Your player is now set to the region you requested. If you find some titles do not play on the region 0 setting, you may have to hard select the appropriate region. : Good Luck. LEt me know if it works